Видео

Thanks for video! This video is also helpful. ruclips.net/video/CQE8MHj2ffg/видео.htmlsi=vvueff9DXt_YCTQg

So what about the oil pump?

Thank you for the video brother Edit*if you see this if I just damaged the condenser should I replace the compressor too?

Its a good way to get the guy to buy a new Grand Wagoner SUV

Hey have you come across a engine noise under valve cover on a 2007 vue v6

Prolly don’t sound like a cam phaser because it doesn’t have any…nah that can’t be it…smh..🙄

Freaking so expensive to do freeon recharge at toyota here in Vancouver Canada, almost 400 dollars . Is it normal?

Any tips for removing the top two bellhouse bolts on a 2006 durango with a 4.7l with 4wd? The stupid transmission harness runs directly in front of the two bolts blocking me from getting them. Any help I’d appreciate

Hello, if you happen to see this how did you go about removing the crankshaft nut and pulley

It's the thermal expansion valve. That is the part it's leaking from the part costs between $25-$75 depending on manufacturer. It takes a few minutes to change then add freeon no need to add PAG because the was likely too much added in the first place to make the valve fail.

I'm needing to know the math on how to adjust the valves etc. on my 97 Toyota corolla 1.6 liter

Hi how are you my racking pinion mount broke into the frame how can I get the broke bolt out

Hey i beleieve i am having the same problem. So with the temp sensor being coated with that slime not having the temp gauges illuminate. Should the radiator still gurle into the reservoir of its overheating??

@MattShaughnessy6 can i do this without taking the whole side timing chain cover off, is it possible with just taking off the small tensioner cover at the bottom?

Nice video

Would love to talk to you

I put my Tracker 03 ' 2.5 engine, together with ur vidio; i need to ask you a guestion about the oil being sucked into rearanifold and out pipe in big clouds of smoke.

Mine still does that after replacing timing chains guides and tensioners, new oil and filter The rattle is the cam phasers, particularly the inlets

I replaced water pump 3rd gen Prius Now ac not blowing cold I already check fuses Everything is fine

Great vid!

Baddasss brother! Thank you!!

Hey where do you get your o-ring for your injectors when you put new ones on injector

Throttle body had the same problem. Also check your spark plugs.

Is that motor the same as the chev utility

Good job 👍

Why in the world would VW make such a flimsy design?

Are you able to get the rocker covers off without having to take almost everything apart in the engine bay? Also, is it a reasonable expectation to change the lifters with the engine still in the truck? Thanks

Good video. The only thing I would have done different was maybe get a can of engine gunk and a pressure washer and cleaned the engine before I took it apart. Lots of dirt on that engine you don't want falling down inside. I have a 3.8 supercharged in my Impala that I will have to do gaskets on soon.

Oh, thanks for the video

This repair SUCKS. Doing it now. Good luck!

Cost…$3800.00

Clean the fins of the radiator and A/C condenser and take off that stupid cover on top of the engine and watch the temp go down. Why they took out the front grill I will never understand. Not enough air goes into the front of the engine to cool it down. The air coming in from under the front makes it a giant vacuum cleaner, sucking up tons of stuff while driving. I am planning to remove the cowling in front of the radiator and add some more window screen to keep the junk out of the radiator. The 3.5 engines are garbage, hastily made and not thought out before throwing them in as a replacement for the 3.8. The 3.8 is still one of the best engines built by GM.

Thanks!

I've been finding a bit of oil in my coolant lately on my 2011 forester. I know its not the same engine but would this possibly happen too? just looking for anything thats not a headgasket hehehe

my lower power steering pump bolt is rounded off and stuck. ANY ideas?

Hey thanks a million times over !!! You really saved me from junking my ride.that Interference info saved my motor.. ❤❤❤

My 5.0 fx4 scab got a bit too warm a few days ago. I opened the hood and began inspecting the hoses. Right away I noticed the upper hose was collapsed. Thanks for posting the fix!

Not only is this alternator buried under the cowl up against the firewall, what are the odds of replacing one only to have a bad bearing in the new replacement. Ask me how I know...

Your video was one of the better videos that I've watched with good information good job

Great advice 🤝

How long will it take me to do my valve covers I got a Chevy tracker 4x4 2.5 v6

Having my passenger side done tomorrow at the shop, I don’t have much tools, no abs wires on that bearing? My backyard mechanics that I usually hire to do mechanic work don’t seem to want to do the bearing assembly lol that’s fine. It sure wore down my brand new winter tires :/ I did hear a noise to, I should have known it was the bearing, I thought it was just my brand new tires lol.

My 2015 crv has the occasional rattle at start up do you think i can replace the tensioner without taking everything apart ,just the cover plate it seems veri close or a bit under the crank pulley thanks .

Angela

I was going to get rid of my 360 and just lose the games but is Gide was Great

What was it cuz mine is doing it to

Air hammer got my axles through the bearing on my van. The axles are a PITA. And I'm in the same boat, no lift.. haha

i do free oil changes for my neighbors makes em happy and doesnt give em a reason to complain love thy neighbor

Привет с другой стороны земли )

Help me matt